Kooper 5902518 - Troubleshooting

 
. TROUBLESHOOTING
Problem Possible cause Solutions
Dehumidifier does not work
The power plug is not connected
correctly
Connect the power plug
correctly
The water tank is full
Empty the water tank
completely.
The water tank has not been positioned
correctly.
Position the water tank
correctly
Reduced dehumidification
capacity
Reduced dehumidification capacity. Clean the filter
The air inlet and outlet from the air inlet
and outlet slots is obstructed
Remove any objects
obstructing the proper air flow
and position dehumidifier as
indicated above to ensure
minimum air inlet and outlet
Appliance makes noise during
operation
The unit is well positioned
Place the machine unit on a flat,
stable, non-slip surface.
The appliance stops during the
dehumidification process
The ambient temperature is too high or
too low and out of the dehumidifier’s
working range.
The dehumidifier will start
automatically when the room
temperature is within the
working range.
Garments are not dried
correctly
The room temperature is very low.
Wet clothes can dry more
slowly at low Temperatures.
The phenomena listed below are due to the scope of operation of the device:
Phenomenon Cause
Intermittent stop during operation Defrosting is in operation
Low dehumidification capacity The dehumidification capacity decreases as the
temperature and humidity in the room change.
Room humidity does not decrease The area of the room is too large, which is beyond the
scope of the appliance. The door and windows of the
room are not closed.
Unpleasent odour The smell may come from walls, furniture and other
things
The unit emits a sound during operation The noise produced by the coolant flow can be
eliminated or lowered automatically while the system
is operating stably.
Tank fill indicator light is on When the water tank is full, the FULL indicator light is
lit. empty the tank