Kooper 5902518 - Operating Instructions; Power Button and Modes; Humidity and Timing Settings; Wind Speed and Sleep Mode


. OPERATING INSTRUCTIONS
1. Power button
This button controls the switching on and o of the appliance.
2. Dehumidification mode:
Press the multifunction button to the left of the power button to select the following modes (press repeatedly to
switch between modes):
1. Normal dehumidification: ventilation intensity and humidity adjustable
2. Continuous dehumidification: low ventilation, humidity not adjustable
3. Ventilation mode: adjustable ventilation intensity, humidity not adjustable
4. Drying mode: predefined high ventilation mode (ventilation intensity and humidity not adjustable).
NOTES: The drying mode allows to favour and speed up the drying process of wet clothes. Before starting the
function, make sure that the appliance is placed at a minimum distance of 50 cm from the drying rack on which
the clothes to be dried are placed and in any case never place the clothes to be dried directly on the appliance
3. Humidity settings
In normal dehumidification mode only, the humidity value can be adjusted using the slider bar under the LED
screen on the control panel:
The humidity can be set between 30% and 70% (5% uncertainty factor), the humidity setting is adjustable only in
normal dehumidification mode;
4. Timing:
Using the “time” button you can set the duration of the dehumidifier operation (1 to 24 hours): once set, the
selected time will be displayed on the screen. Once set, the selected time will be displayed on the screen. With this
function, an automatic switch-o can be selected once the unit has been started.
5. Wind speed
The speed button is only valid in normal dehumidification mode and ventilation mode.
6. Sleep:
Press the button to enter Sleep Mode; once pressed, both the LED screen light and the coloured LED light located
near the air outlet slots will turn o. During sleep mode, press any other button to restart the screen
.