select:
means the clothes can be stored after drying.
means the clothes has a small amount of water and can be ironed.
means the clothes can be worn immediately after drying.
(7) Delay End
- This function can delay the end time of the program.
- Make an appointment after selecting programs and functions. Press the appointment button to
add or reduce the appointment time. The time changes by 1 hour for each press, and the maximum
optional time is 24 hours.
- The appointment time is the end time of the program, including the running time of the whole
program, so the appointment time must be longer than the running time of the program.
- During the appointment process, the appointment icon is lit up. After the appointment process
ends, the appointment text goes out.
- Before the program starts, the selected appointment can be canceled by selecting other
programs or function keys.
- After the program is started, in case of canceling the appointment, shut down and restart the
dryer.
(8) Child Lock
In order to avoid children’s misoperation and protect children’s safety, this fryer is equipped with
child lock.
- After the program is started, press and hold “More Time+Less Time” simultaneously, the child lock
will be enabled and the child lock icon will be lit up. The child lock can be released by the same
operation.
- After the child lock function is set, other function keys are locked. In case of program ends or
restart after power-o, the child lock function set remains.
- After the child lock function is enabled: Press the “Start Pause” key to cancel the promptin case of
prompt for lint and debris cleaning. During running in anti crease mode, the child lock needs to be
released manually, and the anti crease function ends automatically.
(9) Mute
- Itis used to turn on/o the beep, except the alarm tone.
- After standby or startup, press and hold “Less Time+Anti Crease” key to turn on/o the mute
function.
“ The mute function will not be released automatically in case of end of program or power-o.
(10) Display
-Itis used to display the remaining time, appointment time, fault code and other information of the
program.
- The time displayed by the program may be dierent from the actual running time. Due to
To Next Page
Loading...