5) Cleaning of heat exchanger
- Please clean the heat exchanger regularly, otherwise the performance of the dryer will be
aected.
1. Press the buckle of the heat exchanger door cover at the lower
left to open the door cover.
2. Turn the locking knob of the base filter cover to unlock position.
After using for a period of time, if there is dust on the heat
exchanger, please remove the dust with tools. Do not touch the heat
exchanger directly with your hands to avoid in jury.
3. Install the cleaned filter and filter cover back to the original
positions, lock the knob and close the heat exchanger door cover.
TROUBIESHOOTING
When the machine fails to operate normally, it may not be a fault. Please refer to the following
methodsfor troubleshooting. If the fault still exists after self handling according to the
recommended method, please unplug the power supply and contact us for after-sales service. All
consequences caused by the maintenance by the user himself or by hiring non-professional after-
sales personnel will be borne by the user.
Problema Metodo di risoluzione raccomandato
The dryer
cannotbe started
Check the power connection;
- Confirm the “Start Pause” key is pressed down;
- Confirm the door is closed properly;
- House fuse is blown, circuit breaker has tripped, or power outage has
occurred.
To Next Page
Loading...