To Next PageTo Next Page
Need help?Do you have a question about the Kopp GDT-294A and is the answer not in the manual?
General safety rules and test lead condition checks before operation.
Best practices and warnings during meter operation.
Explanation of various warning and function symbols used in the manual.
Procedure for cleaning the meter using a damp cloth and mild detergent.
Identification of meter components, sockets, and displays.
Instructions for turning the meter on/off and the auto power off feature.
Description of connection ports for test leads based on function.
Instructions for DC and AC voltage measurement.
Instructions for DC and AC current measurement.
Instructions for resistance measurement, including notes on over-range.
Procedure for audible continuity testing.
Procedure for testing diodes and forward voltage drop.
Procedure for testing transistor hFE values.
Procedure for measuring capacitance, including notes on in-circuit testing.
Procedure for measuring temperature using a thermocouple.
Procedure for measuring frequency.
Using the Data Hold button to freeze displayed readings.
Using Up/Down buttons to adjust measurement ranges.
Selecting manual or auto ranging modes.
Procedure for replacing the meter's battery.
Procedure for replacing fuses with correct voltage and current ratings.
General| Diode Test | Yes |
|---|---|
| Continuity Buzzer | Yes |
| Power Supply | 9V battery |
| DC Current Range | 200μA to 10A |
| AC Current Range | No |
| Capacitance Range | No |
| Frequency Range | No |
| Display | 3 1/2 digit LCD, max. indication 1999 |
