To Next PageTo Next Page
Need help?Do you have a question about the Kopp GDT 295A and is the answer not in the manual?
Provides multilingual introductions and lists supported models (GDT-292A to GDT-295A).
Covers pre-use checks, safety rules, and test lead condition.
Details precautions and limits during operation, avoiding misuse.
Explains safety symbols and basic maintenance procedures for safe operation.
Describes power button, selector, display, input jacks, and control buttons for various models.
Step-by-step guide for measuring DC and AC voltage using the meter.
Guide on connecting leads and setting the meter for DC and AC current measurement.
Instructions for measuring resistance, including notes on over-range and high resistance readings.
How to perform an audible continuity test and interpret results.
Steps for testing diodes, including forward voltage drop and reverse polarity.
Procedure for testing transistor hFE values using the dedicated socket.
Instructions for measuring capacitance on specific models, including notes on discharge and ranges.
Guide for measuring temperature using a thermocouple on a specific model.
How to measure frequency, including input voltage considerations.
Explains data hold function and manual/auto ranging controls.
Details the DCA/ACA selection and silence buzzer buttons.
General| DC Current Ranges | 200µA, 2mA, 20mA, 200mA, 10A |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Battery Test | 1.5V, 9V |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V |
| AC Voltage Ranges | 200V |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Display | 3.5 digit LCD |
