30
2.2 Picture
To access the menu, press the button MENU and then, using the arrow [Vol+/Vol-],
select Picture. Using the arrow [CH+/CH-] you can select the sub-menu (Aspect
Ratio, Resolution, TV Format, OSD Settings, Panel Setting) and press OK to
open the selected item or using the [Vol+/Vol-] you can directly change the settings.
Press EXIT to exit the menu.
▪ Aspect Ratio: You can choose the type of image format.
▪ Resolution: In Resolution you can choose the resolution used.
▪ Tv Format: Please don’t change this value (PAL).
▪ OSD Settings: You can choose the OSD Timeout, in minutes, of the OSD and
transparency/Brightness/Chrome and Contrast.
▪ Panel Setting:
2.3 Search
To access the menu, press the button MENU and then, using the arrow [Vol+/Vol-],
select Search. Using the arrow [CH+/CH-] you can select the sub-menu (Search
Mode, FTA Only, Auto Search, Manual Seacrh, Country, Antenna Power) and
press OK to open the selected item or using the [Vol+/Vol-] you can directly change
the settings. Press EXIT to exit the menu.
▪ Search Mode: Set DVB-T2.
▪ FTA Only: All is for encrypted and free channels, FTA just be for free channels.
▪ Auto Search: Automatic channel tuning will start immediately. This process is
completely automatic but can last several minutes. After tuning, you can watch TV.
▪ Manual Search: You can scan manually. It is strongly recommended to perform
automatic channel scanning.
▪ Country: Select the country where the device will be used. This choice is critical
because for a correct reception of the channels.
▪ Antenna Power: Set to ON when having an active antenna without power adapter.
Set to OFF when having passive antenna or active antenna with power adapter.
2.4 Time
To access the menu, press the button MENU and then, using the arrow [Vol+/Vol-],
select Time. Using the arrow [CH+/CH-] you can select the sub-menu (Region and
Time, Sleep(hour), Timer Setting, Power ON/OFF) and press OK to open the
selected item or using the [Vol+/Vol-] you can directly change the settings. Press
EXIT to exit the menu.
▪ Region and Time: You can select the correct time. Verify in Current Time that the
visualized time is correct.
To Next Page
Loading...
