34
2. Using screws (M6), attach the left and right side panels, the speaker box, and
the pedal box.
Position the speaker box with its speaker cable upward (the speakers facing
yourself). You will re-tighten all the screws after the entire piano is assembled.
You must attach the anti-tipping blocks to the rear edge of the left and right
side panels unless you will be placing the LP-350 against a wall.
To attach the anti-tipping blocks to the side panels, fasten each block with a
screw from behind. Make sure that the area of contact between the side
panel and anti-tipping block is flat.
Screws
Screws
Speaker cable
Pedal cable
Anti-tipping block
Screw
To Next Page
Loading...
