Korg DSS-1 - FDC Terminal Description

IPROCEDURE 12
Press Up key (A) of Data Entry to advance Program
Number. Display shows as Fig. 28.
Fig. 28
SYSA P12: DDL2-Lon
VOICE No.1
Now it is in DDL-2 Long Delay Check Mode.
• DDL-2 Long Delay Check Mode (KLM-1050)
1. As Procedure 11, play C4 key to confirm if delay
sound of line-out "FT starts to decay after about 2
sec. (Sound check just by listening is enough.)
IPROCEDURE 13
Press Up key (▲) of Data Entry to advance Program
Number. Display shows as Fig. 29.
Fig. 29
SYSA P13: DDL-MUT
VOICE No.1
Now it is in Delay Time Mute Check Mode
• Delay Time Mute Check Mode
1 Press Mode Sw. (Program/Parameter) and select
Parameter No. 81 (Delay Time).
2 While pressing any single key, move Data Entry B
Slider randamly.
3 Confirm if Delay Time is changed following the
Slider's move, and if the mute is on the sound when
the time is changed.
4 Repeat above 1 - 3 to check DDL-2 with Parameter
Number 92.
48
Scan by Manual Manor
http://www.markglinsky.com/ManualManor.html