Korg DW-6000 - Page 39

I
7 MIDI
Using
a
Computer for Automated Performance.
I
Computer
Display Disk drive
(with appropriate
software)
MiDI
INf*
THRU
MiDi interface
DW-6000
EX-800etc.
To
MID! IN jack
of other synth or rhythm
machine
Software, such
as
Korg's new KSQ-800 4 Track MIDI Se-
quencer, is available for some computers to enable
automated
control of
MIDI
synths and drum
machines.
Tfie
interface is
necessary
to
convert
the
computer
output
to the proper MIDI signal
format.
By using
the MIDI
THRU jack
you can connect additional
synths
and rhythm
machines.
The
number
of synths
(and/or rliythm
machines)
con-
^nected in
series
using
MIDI THRU
jacks
should
be
limited
to two or three.
Results
may
be unpredictable
If more
units are
used. The
solution
is to use
a
parallel
MIDI
connection
device such
as the Korg
KMT-60
MIDI
THRU
Box.
Be
sure
to read
and follow
the instructions
for
opera-
tion
of all other
equipment
to be
connected.
If the DW-6000
is being used
in a MIDI connected
system and starts
producing erratic
results (making
a
continuous sound,
going out of tune, producing
erratic
modulation,
etc.) press the front
panel WRITE
button.
This resets
the circuitry.
•
39