12
Chapter 1
Rear panel
1
MIDI (IN, OUT) connectors:
Connectors that are used to connect other MIDI
devices (sequencer, keyboards, etc.). OUT: Data output (to be connected to the
MIDI IN connector of another MIDI device). IN: Data input (to be connected to the
MIDI OUT connector of another MIDI device).
See page 29.
2
PEDALS connector:
Connect the supplied pedal group to this connector.
See
page 19.
3
INPUT (R, L/MONO) connectors:
Audio inputs. Connect to these connectors an
external audio source, such as a CD/tape player, a mixer, or another keyboard.
See
page 27.
Warning:
Avoid connecting the output of a power amplifier to these inputs!
4
OUTPUT (R, L/MONO) connectors:
Audio outputs. Connect these connectors to
an external amplifying system. (With a hi-fi system use the AUX or TAPE connec-
tors, not the PHONO connector). To amplify the EC150 in mono, connect the single
L/MONO connector. Use the MASTER VOLUME slider to set the output volume.
See page 27.
5
DC IN connector:
Connect the supplied AC/DC adapter to this connector.
24315
To Next Page
Loading...
