Korg EC150 - Standard MIDI Settings; Selecting the Transmission Channel

30 Chapter 6
To connect the EC150 to a computer, you need a MIDI interface for the computer,
sequencing or musical notation software, and two standard MIDI cables. Connect
the EC150 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the EC150 MIDI IN connector to the MIDI OUT connector of the computer.
For example:
Standard MIDI settings
When turning the instrument on, the MIDI parameters of the EC150 are pro-
grammed as follows:
Selecting the transmission channel
The standard MIDI has 16 separate channels available for transmission and recep-
tion of data. EC150 always receives on all 16 channels, and transmits on a single
channel. To transmit data from the EC150, you need to choose which of the 16
channels you wish to transmit data on.
Parameter Setting
Transmission channel 1
Reception channel(s) All 16 (1-16)
Local ON
Omni ON
MIDI OUT MIDI IN
MIDI OUTMIDI IN
EC150 rear panel