Korg EK-50 - MEDIA Functions - Storage and Files; Storage Media Compatibility; Supported Capacities; File and Folder Structure

MEDIA functions
25
Storage media that can be used
The EK‑50 supports the use of USB storage devices such as
FAT16 or FAT32‑formaed ash drives or disks.
Supported capacities
FAT32: Up to 2 TB (2,000 GB)
FAT16: Up to 4 GB
File and folder structure
This instrument can save and load set lists, as well as save user
songs.
When saving data to USB ash drives from this instrument,
or when formaing USB ash drive, a folder directory named
“EK
‐50
” will automatically be created on the media.
When using the MEDIA functions “SetListBackUp” and “Song
Convert”, the les shown below will be saved to the directory.
SetList: The “SetList” directory will be created, and a le named
“SetListData_##.json” will be saved to the directory. The “##”
characters above are a placeholder for the le number, which
can be from 01 to 40.
UserSong_###.mid: This represents a user song le on this
instrument that has been converted to a MIDI le (SMF format
0). The “###” characters above are a placeholder for the le
number.
The WAV, MP3, SMF and MID les in the “EK‑50” directory can
be loaded into this instrument as user songs.
When you insert a USB ash drive into the EK‑50, the
instrument searches for the relevant les in the “EK‑50”
directory, and displays these les as a list from M01 to M99 in
song mode.
The supported formats for each le type are as shown below.
WAV : Supported sample rate = 44.1 kHz
MP3: Supported sample rate = 44.1 kHz, VBR compatible
SMF, MIDI: SMF formats 0, 1