Korg EK-50 - MEDIA Functions; Connecting and Removing USB Flash Drives; Basic Method of Use; Formatting a USB Flash Drive

MEDIA functions
24
MEDIA functions
Connecting and removing USB ash drives
1.
Turn o the power.
2.
Connect a USB ash drive (commercially available) to the
USB TO DEVICE port.
Make sure that the USB ash drive is facing the right
direction when you insert it. If you try to push the drive in
the wrong way too hard, the port on the instrument or the
drive itself may break, or you may lose your data.
3.
Turn the power back on.
The USB icon (
) will be shown in the top right of the
display.
Note:
If does not display, turn o the power and
reconnect the USB ash drive.
Note:
Be sure to format the USB ash drive before using it for
the rst time on this instrument.
When removing the USB ash drive, be sure to turn o the
power rst.
Basic method of use
The basic method of making seings using the MEDIA
functions is as shown below.
The MEDIA functions will not work unless you plug a USB
ash drive into this instrument.
1.
Connect a USB ash drive.
See “Connecting and removing USB ash drives”
(page 24).
2.
Press the MEDIA buon.
This will enter the MEDIA functions.
3.
Select the menu to set using the CATEGORY buon, and
press the MEDIA buon.
“Enter [MEDIA]” will be displayed.
4.
Press the MEDIA buon.
5.
Turn the dial to select the next function, and follow the
directions shown in the display.
For instance, to select “Yes [MEDIA]”, press the MEDIA
buon to go to the next step. To select “Cancel [<]”, press
the CATEGORY buon
t
to stop the operation and return
to step 2.
6.
When the operation is nished, the message “Completed!”
will be displayed. Press the [SHIFT] buon to return to
the previous mode.
Formatting a USB ash drive
In order to use a USB ash drive on this instrument, you will
need to format (initialize) it rst.
1.
In the MEDIA functions, press the CATEGORY buon u
and select “Media Format”.
The message “Enter MEDIA Key” will be displayed.
2.
Press the MEDIA buon.
“Cancel [<]” will be displayed.
3.
Turn the dial to select “Yes [MEDIA]”, and press the
MEDIA buon.
“Are You Sure?” will be displayed.
4.
Turn the dial to select “Yes [MEDIA]”, and press the
MEDIA buon.
5.
When the operation is nished, the message “Completed!”
will be displayed. Press the [SHIFT] buon to return to
the previous mode.
List of MEDIA functions
Page Menu Contents of seings
P.01 SetListBackUp Saves all set lists to the USB ash
drive.
P.0 2 SetListRestore Loads all set lists from the USB ash
drive.
P.0 3 Song Convert Saves the user songs to the USB ash
drive in SMF (Standard MIDI File)
format.
Current: This saves the user song
currently selected in song mode.
ALL: This saves all user songs.
P.0 4 Media Format See page
24
“Formaing a USB
ash drive”.
P.0 5 SystemUpdate This updates the system on this
instrument.