26
During resampling, you can press the PLAY/PAUSE key to pause the
pattern or song playback while continuing to sample.
Resampling just one note of a part
1. Make sure that you are in Pattern mode, Song mode, or Sample mode.
Pattern or Song mode are appropriate when you want to resample
multiple parts together, but the sampled volume will be lower. If you
are resampling only one sound, we recommend that you use Sample
mode.
2. Press the STOP/CANCEL key to stop playback.
3. Hold down the SHIFT key and press the REC key to enter sampling-
ready mode. (The REC key and the PLAY/PAUSE key will blink.)
The display will indicate the mode for resampling.
4. Turn the dial to select “Mono” (monaural) or “Stereo” (stereo).
5. Press the key of the part you want to sample. You will hear the sound
of the part you pressed, and sampling will begin at the same time.
(The REC key will blink and the PLAY/PAUSE key will light.)
In the case of a keyboard part, sampling will begin the instant you
use the step keys to play.
6. Press the STOP/CANCEL key to stop sampling. (The REC key and
the PLAY/PAUSE key will go dark.)
If you decide to cancel while still in sampling-ready mode, press the
STOP/CANCEL key before you start sampling.
To Next Page
Loading...
Need help?
General
