Korg EX-8000 Owner's Manual

q How to Receive Data from another EX-8000, DW-8000, etc.
(Synthesizer containing
(Receiving Sound Data)
m SINGLE PROGRAM LOAD (Receives 1 Program Only)
desired program)
1. Set WRITE Switch to ENABLE.
c
2. Set value of parameter 78 to 1.
’
WRlTF
I
_
ENABLE m DISABLE
3. Specify desired program number with number keys.
I
WRlTE
4. Push WRITE key q Program Number flashes.
c
Flashing
5. Specify program number which data is to be loaded into with number keys.
------+ Received
If the data has successfully loaded into the internal memory the Display will give
a “Good” message. If it has not successfully loaded, an “Err” message will ap-
pear. In this case, push the WRITE key and repeat steps 3-5.
c
WRITE
6. Push WRITE key q Display returns to normal.
I
7. To Receive other data, repeat steps 3-6.
I
8. Return WRITE Switch to DISABLE.
-

Korg EX-8000 Specifications

General

Brand	Korg
Model	EX-8000
Category	Control Unit
Language	English