6. Joystic check
6-1. JOYSTI CH X axis
"| " almost in the cent er of the oper ating r ange of t he X
axis is displayed on the L CD di splay when t he lever is
moved.(see r ight figur e)
Please per for m t he following checks, making sur e t hat the "| " in t he dir ection in which you
oper ate t he lever is moved.
Confir m that JOY moves smoothly whil e doing the following all check.
Check displaying “o” r ight side when JOYSTI C i s moved
to a r ight edge
(see r ight figur e)
Check displaying “o” r ight si de when JOYSTI C i s moved t o
a left edge.
(see r ight figur e)
Check displaying “o” center when JOYSTI C is r et ur n to
the center.
(see r ight figur e)
Confir m t hat movement i s smooth moves smoot hly while moving JOYSTI C up and down and
r ight and left .
One r otation i s made by right tur ning wit h it finished to knock down JOYSTI C.
One r otation i s made by left t ur ning with it finished to knock down JOYSTI C.
Release JOYSTI C aft er knock ing down t o the left end, and i t r etur ns i t to the cent er by t he
power of the spr ing.
Check di splaying “o” cent er.
Confir m that [OCTAVE DOWN] L ED lights.
Push [OCTAVE DOWN] and st ar t next check.
(not e1) When object s other t han the inspection object are oper at ed, LED bl inks.
I t is possible t o retr y it by pushing [SH I FT/EXI T] button.
6--2. JOYSTI CH Y axi s
"| " almost in the center of the oper ating r ange of the Y
axis is displayed on the L CD display when the lever is
moved.(see r ight figur e)
not e) I f Joystic is pr essed upwar d, "| " moves t o the right .
I f it i s pr essed downwor d, “| ” moves to the l eft.
Please per for m t he following checks, making sur e t hat the "| " in t he dir ection in which you
oper ate t he lever is moved.
Confir m that JOY moves smoothly whil e doing the following all check.
Check di splaying “o” r ight side when JOYSTI C is
To Next Page
Loading...
