To Next PageTo Next Page
Need help?Do you have a question about the Korg KingKORG and is the answer not in the manual?
General| Type | Analog Modeling Synthesizer |
|---|---|
| Polyphony | 24 voices |
| Arpeggiator | Yes |
| MIDI | In, Out, Thru |
| Sound Engine | XMT (eXpanded Modeling Technology) |
| USB | Type B |
| Oscillators | 3 per voice |
| Effects | Reverb, Delay, Chorus, Flanger, Phaser, EQ, Distortion |
| Keyboard | 61 keys, Velocity-sensitive |
| Inputs | Mic In |
| Outputs | L/Mono, R, Headphones |
| Vocoder | Yes |
| Display | Backlit LCD |
| Presets | 200 Programs |
| Weight | 7.0 kg |
Configure Voice Mode (Single, Layer, Split) and Timbre A/B settings.
Select basic waveforms like Saw, Pulse, Triangle, Sine for oscillators.
Adjust specific parameters like Waveform and Pulse Width for oscillator types.
Explore White, Pink, Blue, and Resonance noise for sound effects.
Choose from 18 filter types (LPF, HPF, BPF) to shape the sound.
Adjust filter resonance, LFO modulation, and keyboard tracking for cutoff.
Adjust Attack, Decay, Sustain, Release for filter cutoff modulation.
Configure Attack, Decay, Sustain, Release for volume modulation.
Assign modulation sources (EG, LFO) to destinations for complex sound design.
Enable/disable vocoder, and set input levels for Timbre A and B carrier.
Configure modulator audio source, gate sensitivity, and threshold.
Enable/disable arpeggiator, set tempo, and use tap tempo functionality.
Select arpeggio type, resolution, gate time, and swing for pattern creation.
Configure global MIDI channel, local control, and MIDI routing options.
Assign MIDI control messages (CC#, Pitch Bend, SysEx) for modulation and control.
Assign control change messages to parameters for external control.
Set CV/Gate modes, CV type (Oct/V, Hz/V), CV range, and gate polarity.
Assign functions to foot pedal and perform calibration for optimal range.
Utilize the vacuum tube for rich overtones and smooth distortion.
Set cutoff frequencies for low and high shelving equalizers.
Connect MIDI sequencers, computers via USB or MIDI for control and recording.
Match the KingKORG's MIDI channel to external devices for proper communication.
Assign CC numbers to parameters for external device control or KingKORG knob control.
Use CC messages for volume, modulation depth, and stereo panning.
Details default CC assignments for transmission and reception of parameters.
Lists default CC assignments for Pitch, Voice, Oscillators, Mixer, Filter, Amp, and EG.
Details default CC assignments for Filter, effects (PreFX, ModFX, RevDly), and Vocoder.
