Korg KingKORG User Manual

- 3 -
KingKORG Parameter Guide Parameters
Parameters
Block diagram
TIMBRE B
Vocoder PRE FX MOD FX
TUBE EQ
OUTPUT
L/MONO, R
GLOBAL
Keyboard
JoyStick
MIDI IN
MIC IN
LFO2 EG2
OSC1
OSC2
OSC3
MIXER FILTER AMP
Pitch
Cutoff Level PAN
Modulation to Synth
L/R
MASTER FX
LFO1 EG1
VIRTUAL PATCH
TIMBRE A
L/R
REV/
DELAY
Explanation of parameter icons
This indicates a parameter that can be controlled from the panel
buttons of the instrument.
This indicates a parameter that can be controlled from the panel
konb of the instrument.
1.
Program parameters
p01: Name
The KingKORG lets you assign a name of up to 12 characters to each
program.
In Program mode, the main display shows the program number and program
name.
To edit the program name
1.
Press the PROGRAM (GLOBAL) button to switch to Program mode.
2.
Use the PAGE +/– buttons to select the Name page.
3.
Press the VALUE dial.
4.
Use the PAGE +/– buttons to move “ ” to the character that you
want.
5.
Turn the VALUE dial to select a character.
6.
Repeat steps 4–5.
7.
Press the VALUE dial to confirm the name.
p02
~
06: Common
Here you can adjust settings that apply to the entire program.
Category .... [Synth, Lead, Bass, Brass, Strings, Piano, Key, SE/Voc,
User]
This selects the program category.
The program will be registered in the category that you select here.
For example when you’re performing, you may find it convenient to select
programs by category. For more about selecting programs by category, refer to
“Selecting by category” on page 100 of the owner’s manual.
VoiceMode ................................................[Single, Layer, Split]
This parameter determines how many timbres a program will use, and how
those timbres will be allocated.
Single:
Only one timbre will be used.
TIMBRE A
Layer:
Two timbres will be used. When you play the keyboard, both timbres will
sound simultaneously. You can edit each timbre individually.
TIMBRE A
TIMBRE B
Split:
Two timbres will be used. You can specify a range of notes for each
timbre, and play each timbre from a different area of the keyboard. Each
timbre can be edited separately.
TIMBRE A
TIMBRE B
Split Position=When G4
Split Position

Korg KingKORG Specifications

General

Type	Analog Modeling Synthesizer
Polyphony	24 voices
Arpeggiator	Yes
MIDI	In, Out, Thru
Sound Engine	XMT (eXpanded Modeling Technology)
USB	Type B
Oscillators	3 per voice
Effects	Reverb, Delay, Chorus, Flanger, Phaser, EQ, Distortion
Keyboard	61 keys, Velocity-sensitive
Inputs	Mic In
Outputs	L/Mono, R, Headphones
Vocoder	Yes
Display	Backlit LCD
Presets	200 Programs
Weight	7.0 kg