7-2. DAM PER Check
Pr ess DS-1H slowly.
Check “o” is displayed on r ight edge when DS-1H is
pr essed to max. posit ion.
Check “o” is displayed on left edge when DS-1H is
r eleased to min. posit ion
Not e) Knob other t han the test object i s t ur ned, L ED will blink all.
I n this case, pr ess the [SH I FT / EXI T] t o clear t he er r or displ ay and resume the test .
8. Audi o level check
8-1 M I C-OUTPU T check
Please make sure t hat M I C I N PU T is connect ed to OUTPU T
with the XL Rmale – M onoPhone cable aft er displaying r ight
pictur e.
St art t he test by pr essing the [VAL UE dial].
I f successful, i t will appear as shown on the r ight
8-2 M I C-H EADPH ONE check
Connect M I C I NPUT and H EADPH ON E with the XL Rmale – mini Ster eoPhone.
St art t he test by pr essing the [VAL UE dial].
When an er r or occur s, L ED all flash, an er r or i s displayed as
shown in the pict ur es right .
I nspection st andard r ange i s shown in the t able bel ow.
I nspection I tem MI N M AX
Out put L =R 0 600
Out put L -R 6000 17000
Out put mute dsd 0 50
Out put mute vol 0 30
Tube L =R 0 3000
Tube L -R 6000 21000
Tube mute dac 0 50
Phone L=R 0 800
Phone L-R 6000 20000
I f successful, go to the next inspection.
To Next Page
Loading...
