Need help?Do you have a question about the Korg Kp3 and is the answer not in the manual?
General| Sampling Frequency | 48 kHz |
|---|---|
| AD/DA Conversion | 24-bit linear |
| MIDI | In, Out |
| Type | Effects Processor |
| Inputs | Mic Input (1/4" phone jack) |
| Outputs | Line Output (RCA pin jacks), Headphone Output (1/4" stereo phone jack) |
| Power Supply | DC9V (AC adapter) |
| Dimensions | 210 (W) x 226 (D) x 49 (H) mm |
| Effects | Filter, Delay, Modulation |
| USB | Type B |
| External Storage | No |
| Sampling Time | Maximum 99.9 seconds (Total) |
Detailed exploded view of the Korg KP3 unit with numbered components.
Illustrates the main functional blocks and their interconnections within the Korg KP3.
Detailed circuit diagram for the digital components of the Korg KP3.
Circuit diagrams covering analog sections and rear panel connections.
Circuit diagrams specifically for the control panel and interface components.
Instructions on how to initiate the basic operational test mode for the device.
Detailed procedures for various repair-specific test sequences.
Procedure to check the integrity and functionality of the EEPROM.
Tests the audio input/output lines for overload conditions using a loopback method.
Verifies MIDI communication integrity through a loopback test.
Checks the functionality of the SD card slot for data storage.
Procedure to test the USB interface for proper operation.
Verifies that all device LEDs illuminate correctly as part of diagnostics.
Checks individual segments of the 7-segment displays for proper lighting.
Tests the PAD LEDs by illuminating them sequentially.
Verifies the functionality of switches and their corresponding LED indicators.
Tests the rotary encoders for correct rotation and LED feedback.
Evaluates the functionality of the FX Depth control and its LED indicators.
Tests the slider control for proper movement and LED feedback.
Assesses the touch pad's ability to register inputs accurately.
Checks the physical condition and responsiveness of the PAD surface.
Executes a preload sequence to initialize system settings or firmware.
Step-by-step guide to recalibrate the touch pad for accurate input.
Comprehensive list of all parts, their numbers, categories, and quantities.
To Next Page
