17
Owner’s manual
3. When you’ve finished adjusting settings, press the REC button to
save the changes and start up the monotribe in its normal state.
If you decide to cancel, press the FLUX button. The changes will
be discarded, and the monotribe will start up in its normal state.
Never turn off the power while data is being saved. Doing so may
destroy the internal data.
The saved settings are remembered even when the power is off.
Specifications
Operating temperature 0–+40°C (non-condensing conditions)
Keyboard Ribbon keyboard
Sound generator Analog synthesis
1VCO (saw, triangle, square), noise gen-
erator, 1VCF (12dB/oct LPF), 1VCA, 1LFO
Drum 3 parts, discrete analog
Sequencer 8 steps
Connectors
AUDIO IN jack ø3.5mm stereo mini-phone jack
OUTPUT jack ø6.3mm stereo phone jack (unbalanced)
HEADPHONES jack ø3.5mm stereo mini-phone jack
SYNC IN jack ø3.5mm monaural mini-phone jack
Maximum input level 20V
SYNC OUT jack ø3.5mm monaural mini-phone jack
Output level 5V
Power supply “AA/LR6” alkaline battery x6 or AA
nickel-metal hydride battery x6
Optional AC adapter (DC9V
)
Battery life approximately 14 hours (when using al-
kaline batteries)
Dimensions (W x D x H)
207 x 145 x 70mm/8.15 x 5.71 x 2.76 inches
Weight 735g/1.62 lbs. (excluding batteries)
Included items Six AA alkaline batteries for verifying op-
eration, owner’s manual
* Specifications and appearance are subject to change without notice
for improvement.
To Next Page
Loading...
