Korg SP 250 - MIDI Computer Connection and Settings; MIDI Transmission Channel Selection

26 Chapter 5
the SP-250 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the SP-250 MIDI IN connector to the MIDI OUT connector of the computer.
Standard MIDI settings
When turning the instrument on, the MIDI parameters of the SP-250 are pro-
grammed as follows:
Selecting the transmission channel
The standard MIDI has 16 separate channels available for transmission and recep-
tion of data. SP-250 always receives on all 16 channels, and transmits on a single
channel. To transmit data from the SP-250, you need to choose which of the 16
channels you wish to transmit data on.
Parameter Setting
Transmission channel 1
Reception channel(s) All 16 (1-16)*
Local ON
Omni OFF
(*) On channel 10, only metronome notes are received (D#5, E5).
MIDI OUT
MIDI IN
MIDI OUTMIDI IN