Korg SP 250 - Stand Assembly Procedure and Parts

34 Chapter 6
Assembling procedure
1 Open the packing carton and take out the contents. Check that all of the following
items are available.
NB: You will need a cross-point (Phillips #2) screwdriver for assembly.
List of parts
A Piano stand (includes parts A’ and A” – please refer to the next page) × 1
B Pedal “beam” (includes parts e – see page 36) × 1
C Pedal × 1
D Piano (main body) × 1
E Power supply × 1
F Power cable × 1
a Long screws M6×30 × 2
b Short screws M6×20 × 2
c Wing bolts M6×20 × 2
d Washers × 4