Panels
11
Warning:
Avoid connecting the output of a power amplifier to these inputs!.
66
66
OUTPUT (L/MONO, R) connectors:
Audio outputs. Connect these connectors to
an external amplifying system. (With a hi-fi system use the AUX or TAPE connec-
tors, not the PHONO connector). To amplify the SP-300 in mono, connect the sin-
gle L/MONO connector. Use the MASTER VOLUME slider to set the output
volume.
77
77
PHONES connector:
Connect one or two pairs of headphones to these jacks.
88
88
DC IN 21V 1A connector:
Connect the supplied AC adapter to this connector.
99
99
POWER switch:
On/off switch.
To Next Page
Loading...
