Korg SP-300 - Standard MIDI Settings; Selecting the Transmission Channel

26 Chapter 5
the SP-300 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the SP-300 MIDI IN connector to the MIDI OUT connector of the computer.
Standard MIDI settings
When turning the instrument on, the MIDI parameters of the SP-300 are pro-
grammed as follows:
Selecting the transmission channel
The standard MIDI has 16 separate channels available for transmission and recep-
tion of data. SP-300 always receives on all 16 channels, and transmits on a single
channel. To transmit data from the SP-300, you need to choose which of the 16
channels you wish to transmit data on.
Hold down the TRANSPOSE/FUNCTION button, and press the note in the range
C2–D#3 corresponding to the desired MIDI channel.
Parameter Setting
Transmission channel 1
Reception channel(s) All 16 (1-16)
Local ON
Omni ON
Key Channel Key Channel
C2 1 C#2 2
D2 3 D#2 4
E2 5 F2 6
F#2 7 G2 8
G#2 9 A2 10
A#2 11 B2 12
SP-300 rear panel
MIDI keyboard
MIDI sound module
MIDI IN
MIDI OUT