New functions of SV-1 version 1.1 | 1
English
KORG SV-1 – Operating System
release 1.1
NEW FUNCTIONS OF SV-1 VERSION 1.1
The following functions are added to SV-1 (and SV-1 Editor) by upgrading to Operat-
ing System version 1.1:
If new, your SV-1 might already include Operating System version 1.1. To check the
system version, please press together the SPEED and INTENSITY knobs in the PRE-
FX section, then read the numbers shown around the knobs (as explained in the User
Guide).
If the new operating system is not installed, download it from our web site. To load the
new operating system into the SV-1, please read the instructions supplied with the
installation file.
Warning: If the memory of your SV-1 contains custom data, please save them using
the SV-1 Editor before loading the new operating system.
Hint: After loading the new operating system, you might need to re-calibrate the pedals.
See the User Guide for the relevant instructions.
THE NEW SV-1 EDITOR
Together with the new operating system, also download the new version of the SV-1
Editor. To install it, please read the instructions supplied with the installation file.
DOWNLOAD THE SOFTWARE FROM OUR WEB SITES
You can find the latest versions of the software and instructions in our web sites.
Function See page
RX Noise/Layer
RX Noise/Layer volume control 2
RX Noise page now called RX Noise/Layer [SV-1 Editor] 2
RX Noise/Layer page [SV-1 Editor] 2
Musical Resources
Layer sounds added 2
Korg Inc. Korg USA Korg Italy
www.korg.co.jp www.korg.com www.korgpa.com
To Next Page
Loading...
