Various messages
162
Medium unavailable
Medium write protected
Memory full
Memory overflow
Memory protected
N
No Data
No items were selected
No Medium
No recording track specified
No space available on medium
Not enough memory
Situation:
A command was executed for a floppy disk whose format was other than MS-DOS
2HD or 2DD.
Action:
Use a different floppy disk.
Situation:
The writing destination floppy disk is write protected.
Action:
Turn off the write protect on the floppy disk, and execute the command once again.
Situation:
When editing a song, track, or pattern etc. in Sequencer mode, the total data of all
songs has reached the sequencer data memory capacity, and the operation is not possi-
ble.
Action:
Increase the amount of free memory by deleting data from other songs, etc.
Situation:
When realtime recording in Sequencer mode, the free memory in which recorded data
is stored has been used up, and recording has been halted.
Action:
Increase the amount of free memory by deleting data from other songs, etc.
Situation:
When loading a Standard MIDI File in Disk mode, the sequencer memory has filled up.
Action:
Delete song data. (If necessary, save it before deleting.)
Situation:
While receiving exclusive data using the Save Exclusive command, the sequencer
memory capacity was exceeded.
Action:
If you wish to receive two or more items of exclusive data, transmit them to the Trinity
separately.
Situation:
The internal programs, combinations, or songs are protected.
Action:
Turn off write protect in Global mode, and execute loading once again.
Situation:
When loading a Standard MIDI File, the file contains no events. Or when saving exclu-
sive data received by Save Exclusive, there is no data to save.
Situation:
In the Save All or Save Combi/Prog dialog box, no check boxes were checked.
Situation:
A floppy disk is not inserted.
Action:
Insert a floppy disk.
Situation:
For realtime multitrack recording, you attempted to start recording when no tracks
were set to a track status of REC.
Action:
Set the track status to REC for the track(s) that you wish to record.
Situation:
For realtime single-track recording, you attempted to begin recording with the current
track as the MTR (master track).
Action:
Select a track 1–16 for recording, and begin recording.
Situation:
You attempted to save a file or create a directory, but there was no free space on the
floppy disk.
Action:
Either delete existing files, or use a different disk that has sufficient free space.
Situation:
When starting realtime recording in Sequencer mode, it was not possible to allocate the
minimum free memory (memory for the bar events up to the recording start location,
etc.).
Action:
Increase the amount of free memory by deleting data of other songs, etc.
To Next Page
Loading...
Need help?
General
