TRITON EasyStart
Arpeggiator mode
TRITON has dual polyphonic arpeggiators, fully editable and syncable to MIDI clock. One program uses one arpeggio
pattern - Combi or Sequence modes use up to two arpeggio patterns at once.
1. Programs have an arpeggio pattern assigned to them even if the Arpeggiator [ON/OFF] key does not “wake up” in the
ON position. Example: Select Program A35 Arco Strings
ÄPress the Arpeggiator [ON/OFF] key so it is on (lit) ÄWork
with the realtime controls: TEMPO, GATE (overall step length), and VELOCITY (loudness of arpeggiated notes)
ÄPress
the Arpeggio tab at the bottom of the screen ÄWork with the Octave radio button, change the clock Reso (=Resolution),
check the Latch box.
2. To view the Arpeggiator grid, press the [GLOBAL] key, press [MENU], press P.6 User Arpeggio ÄThe procedure is
covered in the Owners Manual Basic Guide, pp. 100-105.
3. Combinations may have up tp two arpeggio patterns assigned to them even if the Arpeggiator [ON/OFF] key does not
“wake up” in the On position ÄExample:Select COMBI A12, Bell Amis ÄNote that Realtime controls affect both arps
globally
ÄPress the Arpegg. A or Arpegg. B tab at the bottom of the screen to work with individual parameters ÄPress
the popup at the XPat: (Pattern) field and try substituting a different arp pattern.
New! Working with the TAP TEMPO Function:
1. Tap Tempo in Program Mode: Select Program A066, Wild Arp
Ä Hold down some notes on the keyboard, and press the
[ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly.
2. Tap Tempo in Combi Mode: Select Combi A102, The 16
th
StrummertÄ Hold down some notes on the keyboard, and
press the [ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly
.
3. Tap Tempo in Sequence Mode: After creating a New Song and pressing the [REC/WRITE] key, press the [ENTER] key 3
or 4 times at the desired tempo: The Metronome updates accordingly
.
4. Tap Tempo of tempo-based Effects: Select Program B082, Space Pod for 2
Ä Note that the [ARP ON/OFF] switch is off
Ä Press the [ENTER] key 3 or 4 times at the desired tempo: the program’s LFO and the BPM of Insert Effect 2
(algorithm 50: St. BPM Delay) both update to the tapped tempo.
Sequence mode: Creating songs quickly with Song Templates
1. Press the [SEQ] keyÄPress the popup by ►S### (song number) and press any number not in use Ä Press OK in
response to the query “Create new song this Song # .
2. Press upper right popup ▼ and press “Load Template Song” ÄPress the popup in the From: ► field and select one of
the P## templates by pressing it. Each song selection will load eight programs to the first eight tracks, and choose and
route appropriate effects.
3. Check the box “Copy Pattern to Track too?” Ä Make sure that the pattern popup is set to “Preset” Ä Press the popup
by ►P### and select a Pattern in the same style as your Song Template choice
ÄPress the OK box 4 to 8 times, to
copy the pattern into the track for a number of measures, then press Exit ÄPress the [START/STOP] key to audition the
copied drum pattern
Ä Press the [START/STOP] key again to stop.
! When you press OK to copy the pattern, you can first select a new pattern to create a series of patterns in the track.
1. Press [LOCATE] to return to the to the beginning of the Song Ä Press the popup at ► Track ## (beneath the Song #)
to select Track 2 (except for the Orchestral Template, Track 2 is always Bass)
Ä Press the [REC/WRITE] key, and then
the [START/STOP] key, and record 2 to 4 measures Ä When finished, press [START/STOP] to stop recording.
4
To Next Page
Loading...
