Need help?Do you have a question about the Korg TRITON and is the answer not in the manual?
General| Type | Workstation |
|---|---|
| Oscillators | 2 per voice |
| MIDI | In/Out/Thru |
| Effects | 2 master effects, 1 insert effect |
| Keyboard | 61 keys |
| Sequencer | 16 tracks, 200, 000 notes |
| Waveform Memory | 16MB |
| Floppy Disk Drive | 3.5 inch 2DD/2HD |
| Optional | EXB-PCM expansion boards |
| Storage | Floppy disk |
| Audio Outputs | L/Mono, R, Individual 1-4 |
| Polyphony | 62 voices |
Covers essential safety rules for operating the apparatus, including water avoidance and ventilation.
Details FCC compliance for Class B digital devices to prevent radio interference.
Explains CE marking standards for AC mains and battery operated apparatus.
Alerts users about risks of electric shock and warns against opening the enclosure.
Recommends saving important data to prevent loss due to malfunction or power loss.
Outlines legal usage for copyrighted works and disclaims KORG's responsibility for infringement.
Guides on connecting audio outputs to mixers or powered speakers and headphone jack.
Instructions for connecting the power cable to the apparatus and an AC outlet.
Details on inserting and removing media into the CF card slot for saving data.
Procedure to load preloaded demo song data into the TRITON Extreme.
Steps to select a demo song from the Sequencer mode and start playback.
Explains how to use the RPPR function with preloaded demo songs.
Guides on using the joystick, ribbon controller, and keys to modify sounds.
Introduction to the Performance Editor sliders for modifying program sounds.
Explains how to use realtime controls to adjust sound parameters.
Details on how knobs control LPF CUTOFF, RESONANCE/HPF, EG-INTENSITY, EG-RELEASE.
Explains B-mode controls for parameters like volume, pan, and effect sends.
Guides on using Valve Force controls: Input Trim, Ultra Boost, Tube Gain, Output Level.
Procedure for changing programs assigned to timbres within a combination.
Instructions on adjusting the volume for individual timbres within a combination.
Steps to create a split keyboard by assigning different sounds to keyboard regions.
Guides on adjusting the stereo pan position for each timbre.
Process for selecting and applying different arpeggiator patterns to a program.
Instructions on adjusting the tempo of the arpeggiator using the TEMPO knob.
Explains how to modify arpeggio playback using GATE, VELOCITY, Octave, and other settings.
Guides on assigning arpeggiators A and B to specific timbres within a combination.
Details on selecting patterns and specifying playback parameters for arpeggiators.
Steps to select programs and adjust insert/master effects and routing.
Guide to sampling a vocal from a mic into a single 'one-shot' playback sample.
Procedure to load template songs and copy preset drum patterns into a song.
How to set a track to repeatedly play specific measures within a song.
Guide to recording arpeggiator performance directly into a song.
To Next Page
