TRITON Training Guide
26
Combination Mode
In Combination mode, you can layer, split or velocity-switch up to eight Programs. There are 512
Combinations in TRITON's internal memory (4 Banks of 128 each). As in Program mode, Combinations can
be Selected-By-Bank and Selected-By-Category. Two arpeggio patterns can be triggered
simultaneously in a Combination, and AMS / controller functions are also available in this mode. Each
Combination can have up to 5 Insert effects and 2 Master effects, plus stereo3-band EQ. Combinations
can be copied to TRITON's sequencer with, or without their effects, and used to create new songs. If the
EXB-MOSS option board is installed, up to 6 MOSS DSP timbres can be assigned to a Combination.
Selecting Combinations
1. Press the COMBI key to the left of the display to enter Combination mode. COMBINATION P0 Play will
be indicated in the upper-left of the display.
2. Press the BANK A key (if not already selected) - it will light, and the display will indicate the current
bank.
There are a number of ways to select Combinations. You can use the Bank, Numeric and ENTER keys to
direct-select a Combination, or use the DIAL or 55 66 value keys to make a selection from within a Bank.
To Next Page
Loading...
