TRITON Training Guide
64
Now to create a new song using RPPR
In the following exercise, you'll load a Template song, view and work with the RPPR Setup page, and assign
some patterns to be triggered.
Load the Template Song:
1. Press the popup button to the left of the S00X: FEVER song field, and select the next - available
empty song number from the popup menu. Press OK from the Are You Sure? dialog box, to create a
new song.
2. Press the Page menu button upper - right), and select Load Template Song from the popup menu.
Press the popup button and select P14: Hip Hop / Rap from the popup menu, then press OK to load
the Template Song.
Assign patterns to keys and work with the RPPR functions:
3. Press the MENU key, then press P6: Pattern / RPPR. Press the RPPR tab at the bottom of the display
to go to the RPPR Setup page.
4. In the RPPR Setup field, press to highlight the KEY: parameter, then hold down the ENTER key and
press key C#2. Press the Assign checkbox to assign RPPR to this key.
5. Press the Sync: Beat popup button and select Measure from the popup menu.
6. Press the Pattern: popup button and select Preset from the popup menu.
7. Press the name field P00: Pop&Ballad 1 /Std and enter 121 with the Numeric keys , then press the
ENTER key.
8. Play and hold key C#2 to trigger the assigned Pattern 121 HipHop 1 / HipHop. To stop playback of the
pattern, press the C2 key - it's reserved as a Shutdown Key, and patterns can't be assigned to it.
9. Press to highlight the KEY: parameter, then hold down the ENTER key and press key D2. Press the
Assign checkbox to assign RPPR to this key.
10. Press the Sync: Beat popup button and select Measure from the popup menu.
11. Press the Pattern: popup button and select Preset from the popup menu.
12. Press the name field P00: Pop&Ballad 1 /Std and enter 122 with the Numeric keys , then press the
ENTER key.
To Next Page
Loading...
