Appendices
225
Corresponds to “Filter/Amp EG Slope Time” (Program P3:
Filter 1/2 EG tab, P4: Amp 1/2 EG tab)
CC#76: LFO1 speed
Corresponds to “LFO 1 Frequency” (Program P5: OSC1/2
LFO1 tab).
CC#77: LFO1 depth (pitch LFO1 intensity)
Corresponds to “Pitch LFO1 Intensity” (Program P2: OSC1/
2 P.Mod tab).
CC#78: LFO1 delay
Corresponds to “LFO1 Delay” (Program P5: OSC1/2 LFO1
tab).
CC#79: Filter EG intensity
Corresponds to “Filter EG Intensity to A, B” (Program P3:
Filter 1/2 Mod. tab).
Different parameters are controlled for the bank F programs
that are available when the separately sold EXB-MOSS
option is installed. (
☞EXB-MOSS owner’s manual)
*6 Controlled on the global MIDI channel.
*7 NRPN (Non Registered Parameter Number) and Data
Entry can be used to control the following parameters.
Arpeggiator on/off
[Bn 63 00 Bn 62 02 Bn 06 nn] (nn:00–3F off, 40–7F on)
Arpeggiator gate control
[Bn 63 00 Bn 62 0A Bn 06 nn] (nn:00–7F)
Arpeggiator velocity control
[Bn 63 00 Bn 62 0B Bn 06 nn] (nn:00–7F)
*8 Corresponds to the operation of the [VALUE] slider as a
controller in Program or Combination P0: Play when
“Program Number: name” or “Combination Number:
name” is the edit cell.
To Next Page
