TRITON Rack EasyStart
4
! More on the Arpeggiator functions, including editing and recording/sync applications in the TRITON Rack Owner’s manual
and TRITON USER GUIDE (korg.com).
The Effects
5 stereo insert and 2 master effects plus 3-band EQ for every Program, Combi and Multi, select from 102 available effects
including dynamic modulation, plus many syncable effects.
1. In COMBI mode, select Combination INT-A 001 Lonely Moon Ä
ÄÄ
Äpress MENU key (below DIAL) Ä
ÄÄ
Ä press F7 key until IFX
is highlighted in display
Ä
ÄÄ
Ä press F8 key and overview the five stereo insert effects in this Combination.
2. Press MENU key Ä
ÄÄ
Ä press F7 key until MFX is highlighted in display Ä
ÄÄ
Ä press F8 key and overview the two master effects
and 3-band EQ
Ä
ÄÄ
Ä press EXIT key (left of MENU key).
! Editing pages for insert and master effects are accessed by pressing F-keys below desired effect tabs in the display. More
on effect routing and editing in the TRITON Rack Owner’s Manual and TRITON USER GUIDE (korg.com).
! REALTIME CONTROL knobs 3 and 4 are set to control insert (3) and master (4) effect wet/dry balance for most Programs
and Combis selected. Try this when working with the Audition Riff function in Program mode.
! Up to 5 stereo insert effects are available in SAMPLING mode, so that you can sample through the insert effects. Once the
multisample is converted to a Program, additional insert effects can then be used in the new Program if desired.
Sampling Overview
16 Mbyte sample memory, expandable to 96 MB with SIMM modules (3 slots); 48k/16 bit linear mono and stereo sampling-
up to 1000 multisamples/4000 samples; compatible with AIFF, WAVE, AKAI S1000/3000, Korg sample formats
Additional Features:
• Sampling time: Fully expanded, the TRITON-Rack allows for up to 17 minutes/28 seconds of sampling time.
• Visual Waveform Editing: TouchView display makes viewing and editing sample data easy! Zoom in and out; quickly-set loop
editing points; use the Grid display based on BPM tempo values, etc.
• Time Slice: Detects attack impulses of sample and cuts up into smaller elements – useful for dividing up a rhythm loop to
change tempo without affecting pitch and visa versa. Source BPM (beats per measure) of the sample data can be manually or
automatically.
• Crossfade Loop: Smooths out irregularities in long loops – useful for reducing clicks and pops that may occur at the loop point.
! More information on Sampling mode in the TRITON Rack Owner’s Manual, TRITON USER GUIDE and TRITON 2.0
Update Guide (korg.com).
To Next Page
Loading...
