Need help?Do you have a question about the Kostal PIKO 8.5 and is the answer not in the manual?
General| Model | PIKO 8.5 |
|---|---|
| Max. Apparent AC Power | 8.5 kVA |
| AC Voltage Range | 184 V - 264 V |
| Maximum DC Input Voltage | 1000 V |
| Maximum Input Current per MPPT | 13 A |
| Max. Input Current | 26 A |
| Number of MPP Trackers | 2 |
| Nominal AC Output Power | 8.5 kW |
| Maximum AC Output Power | 8.5 kW |
| Nominal AC Voltage | 230 V |
| Operating Temperature Range | -25 °C to +60 °C |
| Cooling | Convection |
| Protection Degree | IP65 |
| Warranty | 5 years |
| Rated Output Power | 8500 W |
| Nominal AC Frequency | 50 Hz |
Defines the intended use of the PIKO inverter and inappropriate usage.
Details the exterior and interior views of the PIKO inverter, identifying key parts and connectors.
Covers selecting an appropriate installation site, mounting, and necessary clearances for the inverter.
Details the inverter's electrical connections, including DC inputs, AC terminals, and external connections.
Explains the correct procedure for connecting solar modules (PV strings) to the inverter's DC inputs.
Guides the user through the step-by-step process of setting up and starting the inverter for the first time.
Provides clear instructions for safely powering the inverter on and off, including de-energizing steps.
Details the steps for establishing a wired connection between the inverter and a computer for configuration.
Details how to activate power control using a ripple control signal receiver connected to the inverter.
Explains the wiring and connection of external load relays for self-consumption control.
Guides users on configuring self-consumption control functions through the web server interface.
Explains how to update the software on the inverter's communication board for new features and fixes.
Details the process for updating the inverter's main firmware to the latest version available.
Presents comprehensive technical specifications for various PIKO inverter models in tabular format.
Details the installation and connection procedure for the PIKO BA Sensor for energy monitoring.
To Next Page
