Page 9
1.2 Other Clearances and Recommendations
1. This heater must be mounted on a noncombustible material, placed
underneath the heater and extending a minimum of 6 inches (150 mm) in
front of the heater.
2. Clearances can ONLY be reduced by means approved by local building or
fire officials in your area.
3. A safety certification label has been attached to the back of the heater. A
sample label is shown here to help you locate this label on your heater.
Please read all information on your heater’s label. All information on the
certification label supersedes any information contained in this manual.
Figure 5 Certification Label
To Next Page
Loading...