EasyManua.ls Logo

kozy heat CSK-34 L - User Manual

kozy heat CSK-34 L
33 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CSK-34 L • May 2014
Rev. 1 • Report Number 216-S-43-6.5
HUSSONG MANUFACTURING CO., INC.

vapors and liquids in the vicinity of this or any
other appliance.
WHAT DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not

• 
• 


• If you cannot reach your gas supplier, call



supplier.


Failure to follow safety warnings exactly could
result in serious injury, death, or property




local codes.
This appliance is only for use with the type of gas
       


      

MODEL #CSK-34 L
DIRECT VENT GAS FIREPLACE INSERT
Tested &
Listed By
O
-
T L
USC
Portland
Oregon USA
OMNI-Test Laboratories, Inc.
English and French installaon manuals
are available through your local dealer.
Visit our website www.kozyheat.com or
scan this QR code for our mobile app.

HOT GLASS WILL
CAUSE BURNS.
GLASS
UNTIL COOLED.
ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this appliance
and shall be installed for the protecon of children
and other at-risk individuals.

Table of Contents

Questions and Answers

  • C
    Christina BarrJul 30, 2025
    Why won't the main burner flame light on my kozy heat CSK-34 L Indoor Fireplace?
    • T
      tracy64Jul 30, 2025
      Several factors can prevent the main burner flame from lighting. First, ensure the ON/OFF rocker switch is in the ON position. Check for multiple shut-offs in the supply line and verify the gas supply is turned on. Low gas supply can also be a culprit, so consult with a plumber or gas supplier and check/refill the LP (propane) tank if necessary. Examine the wiring for disconnections or incorrect connections. A plugged main burner orifice can also cause this issue, so remove any blockage. Verify the pilot flame is properly directed to ignite the burner. Replace the remote control batteries. Finally, ensure the remote control is powered ON and the thermostat operation is turned OFF.
  • J
    James ReedAug 3, 2025
    How to fix a pilot light that won't light on my Kozy Heat Indoor Fireplace?
    • J
      Jessica WashingtonAug 3, 2025
      If the pilot light won't light on your Kozy Heat Indoor Fireplace, the issue might stem from a few causes. First, check if there's an electrical power interruption or disconnection; if so, restore electrical power to the fireplace or use the battery back-up. If you're using the battery back-up, make sure the batteries are fully charged. Also, inspect the wiring for any disconnections, using the wiring schematic in the manual to ensure all connections are secure and correct. Finally, check that the gas supply is turned on, looking for any remote shut-off valves near the main gas line, as there may be more than one valve between the fireplace and the main gas line.
  • S
    Sharon SmithAug 7, 2025
    What to do if the pilot light keeps going out on my Kozy Heat Indoor Fireplace?
    • T
      Thomas HernandezAug 8, 2025
      If the pilot light on your Kozy Heat Indoor Fireplace won't stay lit, consider these potential causes: * Check the LP (propane) tank and refill if necessary. * Low gas pressure can be the issue, so consult a plumber or gas supplier, as this can be due to a bent line, a pipe with too narrow diameter, or low line pressure. * The pilot flame might not be making contact with the flame rectification sensor on the pilot assembly; if so, adjust the pilot flame adjustment screw on the gas valve as needed. * Ensure the pilot adjustment screw is sealed, but do not over-tighten it.
  • D
    Derek LopezAug 12, 2025
    Why do the pilot and burner extinguish while my kozy heat CSK-34 L Indoor Fireplace is running?
    • K
      kirbysarahAug 12, 2025
      Several issues could cause the pilot and burner to extinguish during operation. Begin by checking the LP (propane) tank and refill it if necessary. Ensure the glass assembly is installed correctly. Adjust the vent cap installation if needed, and remove any debris blocking the vent cap. Inspect the inner vent pipe for leaks, repairing them if necessary. Finally, excessive draft could be the problem, so consider installing an exhaust restrictor into the exhaust pipe outlet of the fireplace.
  • R
    rubiowillieAug 16, 2025
    Why is my Kozy Heat Indoor Fireplace not responding to commands?
    • M
      Megan PhillipsAug 16, 2025
      If your Kozy Heat Indoor Fireplace isn't responding to commands, the batteries in the battery pack or remote control might be low, so replace them. Reset the IFC module.
  • R
    Rachel ColeAug 21, 2025
    Why does the flame on my Kozy Heat Indoor Fireplace burn blue and lift off the burner?
    • J
      jason34Aug 21, 2025
      If the flame on your Kozy Heat Indoor Fireplace burns blue and lifts off the burner, the venturi setting may be improper; the venturi may need to be opened slightly to allow more air into the gas mix. Also, check for incorrect vent cap installation and adjust if necessary. Finally, check the vent pipe for leaks and the vent cap for debris, repairing the vent pipe or removing debris from the vent cap if necessary.
  • A
    Anthony DunlapAug 25, 2025
    Why is the pilot flame always on or not extinguishing on my kozy heat CSK-34 L Indoor Fireplace?
    • S
      Shawn PerezAug 26, 2025
      If the pilot flame on your Kozy Heat Indoor Fireplace is always on or won't extinguish, the control system may be set to CPI mode. Set the control system to IPI mode.

Summary

Introduction and Safety Requirements

Massachusetts Installation Requirements

Outlines specific MA requirements for CO detectors, signage, and venting.

Carbon Monoxide Detector Installation

Specifies placement and type of CO detectors for side-wall vented appliances.

Installation Procedures

Prepare Existing Fireplace

Vent System Connection

Instructions for connecting the vent system to the air duct and fireplace insert.

Gas Line and Setup

Gas Line Installation

Procedures for safely connecting the gas supply line to the appliance.

Electrical, Operation, and Controls

Initialize the Control System

Steps to initialize and synchronize the IFC module with the remote control for initial operation.

Appliance Operation

Adjustments, Troubleshooting, and Maintenance

Pressure Testing

Burner Tube Venturi Adjustment

Troubleshooting Common Issues

A guide to diagnosing and resolving common issues with the fireplace.

kozy heat CSK-34 L Specifications

General IconGeneral
ModelCSK-34 L
CategoryIndoor Fireplace
BTU/hr Input34, 000
Fuel TypeNatural Gas or Propane
Ignition SystemElectronic Ignition
TypeDirect Vent
Voltage120V
Remote ControlOptional
ThermostatOptional
FinishBlack

Related product manuals