KPS KPS-TL10 User Manual

MANUAL DE FUNCIONAMIENTO
MANUAL DE FUNCIONAMIENTO
INSTRUCTIONS MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUÇÕES
Medidor de resistencia de tierra digital
Digital earth resistance tester
Mesureur de résistance de terre digital
Medidor de resistência de terra digital
KPS-TL10
602350001
DIGITAL
EARTH RESISTANCE TESTER
KPS-TL10

KPS KPS-TL10 Specifications

General

Brand	KPS
Model	KPS-TL10
Category	Test Equipment
Language	English

Summary

Introduction and Device Overview

Component Identification

Lists and describes the numbered components of the digital earth resistance tester, including jacks, indicators, switches, and display.

Safety Precautions and Specifications

Safety Notes

Details essential safety warnings for operating the meter, including avoiding electrical shock and water damage.

Technical Specifications

Outlines the meter's measurement system, voltage/resistance ranges, accuracy, safety standards, and physical attributes.

Measuring Methods and Operation

Test Lead Connection

Instructions on connecting green, yellow, and red test leads to instrument terminals and auxiliary earth bars.

AC Voltage Check

Procedure to set the function switch to ACV and verify voltage reading is below 10V AC for accurate resistance measurement.

Resistance Measurement Procedure

Steps to set the range, function switch to Ohm, and press buttons for taking earth resistance readings.