3.2 650R Coax-DVI Receiver
The Kramer DigiTOOLS
®
650R is a coax-DVI receiver that receives a coded coax
signal transmitted by the 650T. It decodes the R-G-B, clock and data components and
converts them to an DVI output.
The 650R features:
A maximum data rate of 6.75Gbps (2.25Gbps per graphic channel) and up
to 720P with HDCP
HDTV compatibility and HDCP compliance
EDID pass-through that passes the EDID between the source and display
Bi-directional IR (Compatible with a Kramer transmitter and via a Kramer
external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE)
and RS-232 interfaces
IR and RS-232 data is available only when using a 5-plug coax cable and the power
coax line is connected.
Power feeding to the 650T
Plug and Play installation with no adjustments
To Next Page
Loading...
