Need help?Do you have a question about the Kramer TP-141 and is the answer not in the manual?
General| Supported Resolutions | Up to 4K@60Hz (4:4:4) |
|---|---|
| HDCP Compliance | HDCP 2.2 |
| Max Range | 100m (328ft) over Cat 6 |
| Input Connectors | 1 x HDMI |
| Output Connectors | 1 x HDMI |
| Power Consumption | 5V DC |
| Type | HDMI over twisted pair receiver |
Summarizes basic setup and operation steps for the transmitter and receiver.
Explains the Power Connect feature for powering the system over CAT 5 cable.
Discusses the recommended use of STP vs UTP cables for optimal performance.
Offers advice on using quality cables and avoiding interference for best results.
Describes the TP-141 transmitter, its topside connections and features.
Details the XGA IN, LINE OUT, AUDIO IN, and 12V DC connectors on the TP-141.
Explains the internal sync polarity switches (VS and HS) within the TP-141 unit.
Introduces the TP-142 receiver and its functionality.
Details the topside connectors and features of the TP-142 receiver.
Describes the underside features of the TP-142 receiver, including polarity and signal switches.
Details the CAT 5 cable pinout (EIA/TIA 568A and 568B) for connections.
To Next Page
