Need help?Do you have a question about the Kramer TP-578H and is the answer not in the manual?
General| Model | TP-578H |
|---|---|
| Input | HDMI |
| Output | HDMI |
| Max Data Rate | 10.2 Gbps |
| HDCP Compliance | HDCP 2.2 |
| Included Accessories | Power adapter, mounting brackets |
| Extensions | RS-232, IR, Ethernet |
| Max Resolution | 4K@60Hz |
| Transmission Distance | Up to 100 m |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% |
| Dimensions | 25 mm |
| Storage Temperature | -40°C to 70°C |
Tips for optimal signal quality and device placement.
Important warnings regarding power, installation, and unit servicing.
Description of each numbered port on the front panel of the TP-578H unit.
Description of each numbered port on the rear panel of the TP-578H unit.
Guide for connecting a serial controller via RS-232 to the TP-578H.
Instructions for connecting balanced and unbalanced stereo audio devices.
Explanation of the 4-way DIP-switch for EDID and output timeout settings.
Details on the syntax rules for Kramer Protocol 3000 commands.
A comprehensive list and description of available Protocol 3000 commands.
To Next Page
