Kramer TP-578H

20
TP-578H - Protocol 3000
10.2 Kramer Protocol 3000 Commands
Command
Description
#
Protocol handshaking
BUILD-DATE?
Read device build date
CPEDID
Copy EDID data from the output to the input EEPROM
DEF-RES?
Assign custom defined scaled video output resolution to “vic” index
DISPLAY?
Read if output is valid
GEDID
Read EDID data
HDCP-STAT?
Get HDCP signal status
HELP
List of commands
KLINK_INF
Set K-Link MCU direct mode
KLINK_CLS
Set K-Link data mode
LDEDID
Load EDID data
LDFW
Load new firmware
MODEL?
Read device model
NAME?
Get machine (DNS) name
PROT-VER?
Read device protocol version
RESET
Reset device
SIGNAL?
Read if input is valid
SN?
Read device serial number
UPGRADE
Execute firmware upgrade
VERSION?
Read device firmware version
Command - #
Command Type - System-mandatory
Command Name
Permission
Transparency
Set:
#
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Protocol handshaking
#␍
Get:
-
-
Response
~nn@␠OK␍␊
Parameters
Response Triggers
Notes
Use to validate the Protocol 3000 connection and get the machine number