Kramer TP-578H - Rear Panel Connectors

TP-578H - Defining the TP-578H DGKat to HDMI Receiver
7
7
Figure 2 defines the rear panel of the TP-578H.
Figure 2: TP-578H DGKat to HDMI Receiver Rear Panel
#
Feature
Function
1
AUDIO OUT 5-way
Terminal Block
Connect to the balanced, stereo audio acceptor (see
Section 5.2)
2
RS-232 3-way Serial
Terminal Block
Connect to the RS-232 serial transmitter or receiver.
Note: Data is transmitted even in the absence of a video or
audio signal (see Section 6.4)
3
REMOTE 3-way Terminal
Block
For future use
4
LED 3-way Terminal Block
For future use
5
PROG. Mini USB
Connector
For the use of Kramer service personnel only
6
DGKat IN RJ-45 TP
Connector
Connect to a compatible DGKat TP switcher/transmitter (for
example, the WP-577VH)
7
K-Link SETUP 4-way
DIP-switch
For setting device functions, (see Section 6.1)
8
12V DC Connector
Connect to the power adapter, center pin positive