Need help?Do you have a question about the Kramer KIT-400 and is the answer not in the manual?
General| Category | Receiver |
|---|---|
| Model | KIT-400 |
| Maximum Resolution | Up to 4K@60Hz (4:4:4) |
| Max. Data Rate | 18 Gbps |
| Power Supply | 5V DC |
| Video | HDMI 2.0 |
| Range | Up to 100m |
Essential safety precautions for device operation and installation.
Highlights key features for ease of use and advanced functionality.
Instructions for installing the unit in a standard equipment rack.
Guidelines for placing the unit on a flat surface.
Step-by-step guide to connect input sources and output devices.
Details on establishing communication using RS-232 serial ports.
Explains direct control using buttons on the device.
Describes operation via external contact closure switches.
Configuration of audio input priority via DIP switches.
How to modify video settings like contrast and brightness.
Configuration of video output resolution and size.
Managing High-bandwidth Digital Content Protection settings.
Steps to access and navigate the device's web interface.
Control of inputs and signal parameters via webpages.
Procedures for updating the transmitter's firmware.
Procedures for updating the receiver's firmware.
Guide to using the room automation software.
Customizing the interface for controlling devices.
Method to copy EDID data from an output to inputs.
Method to copy EDID data from one input to others.
Explanation of the command structure and syntax.
Commands for controlling the transmitter.
Commands for controlling the receiver.
List of error messages and their descriptions for troubleshooting.
To Next Page
