Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 4
Defining KIT-400 4K Auto-Switcher/Scaler Kit 5
Defining KIT-400T 5
Defining KIT-400R 6
Mounting KIT-400 8
Connecting KIT-400 9
Connecting the Output to a Balanced/Unbalanced Stereo Audio Acceptor 10
Connecting to KIT-400 via RS-232 10
Connecting an Occupancy Sensor to the TOGL Pin 11
Wiring RJ-45 Connectors 11
Operating and Controlling KIT-400 12
Using Front Panel Buttons 12
Using Remote Control Switches 12
Setting KIT-400T DIP-switches 13
Tunneling RS-232 data between KIT-400T and KIT-400R 13
Using the OSD Menu on KIT-400R 16
Operating via Ethernet 25
Using Embedded Webpages 28
Browsing Webpages 28
Switching and adjusting Port Signals 30
Defining General settings 31
Configuring Network Settings 33
Defining Time and Date 35
Upgrading the Firmware 36
Setting Authentication 38
Defining Video and Audio Settings 40
Defining Receiver Settings 42
Configuring Device Automation 43
Operating via Room Automation Panel 46
Managing EDID 59
Viewing About Page 64
Upgrading Firmware 65
Upgrading KIT-400T 65
Upgrading KIT-400R 65
Technical Specifications 66
Default Communication Parameters 68
KIT-400R Output Resolution Support 68
Default EDID 68
Protocol 3000 75
Understanding Protocol 3000 75
Protocol 3000 Commands 76
Result and Error Codes 92
To Next Page
Loading...
