Kramer KIT-400

Kramer Electronics Ltd.
KIT-400 – Using Embedded Webpages
42
Defining Receiver Settings
KIT-400T enables quickly setting up KIT-400R via the embedded webpages.
To set KIT-400R parameters:
1. In the Navigation pane, click Quick Receiver Setup. The Video & Audio Settings page
appears.
Figure 28: Quick Receiver Setup Page
2. Perform the following actions on KIT-400R:
▪ Select the HDBT input EDID.
▪ Select the HDMI input EDID.
▪ Set the HDMI output resolution.
▪ Set the output aspect ratio.
▪ Enable or disable HDCP support on the HDBT and HDMI inputs.
The selected button momentarily turns blue.
KIT-400R basic parameters are set.