Kramer KIT-400

Kramer Electronics Ltd.
KIT-400 – Using Embedded Webpages
38
Setting Authentication
KIT-400T enables activating device security and defining logon authentication details. The
upper right corner of the webpage displays or indicating whether authentication is
required.
By default, the webpages are secured (username and password are both: Admin).
Disabling Authentication
To undo authentication:
1. In the Navigation pane, click Device Settings. The Device Settings page appears.
2. Select the Authentication. The Authentication tab appears.
Figure 23: Device Settings Page – Authentication Tab
3. Click the Disabled button for Active Security. A confirmation message appears.
Figure 24: Authentication Tab – Confirmation Message.
4. Enter current password.
5. Click OK.
The webpage refreshes, the password fields disappear, and the upper right icon changes to
.