Syncing Time and Date Via a Server
To sync device time and date to a server:
1. In the Navigation pane, click Device Settings. The Device Settings page appears.
2. Select the Time & Date tab. The Time & Date tab appears (Figure 20).
3. Set Use Time Server (NTP) to YES.
Device Time & Date Fields are disabled, and network fields are enabled.
4. Enter the time server address.
5. Define the daily sync time from the drop-down box.
6. Click Save Changes.
The devices date and time are synchronized to the server address entered.
Upgrading the Firmware
KIT-400T enables updating the firmware via the embedded webpages.
To upgrade the firmware:
1. In the Navigation pane, click Device Settings. The Device Settings page appears.
2. Select the FW Upgrade tab. The FW Upgrade tab appears.
Figure 21: Device Settings Page – FW Upgrade Tab
3. Click Update.
The Windows browser opens.
To Next Page
Loading...
