Kramer KIT-400

Kramer Electronics Ltd.
KIT-400 – Operating and Controlling KIT-400
18
Selecting an Input Signal
Select the KIT-400R input source via the OSD menu.
To set the input source:
1. On the front panel press MENU. The menu appears.
2. Click INPUT and select the SOURCE
3. Press ENTER and select HDMI or HDBT.
An input signal is selected.
Locking KIT-400R Input Buttons
KIT-400R enables locking the input select buttons.
To set the input source:
1. On the front panel press MENU. The menu appears.
2. Click INPUT and select INPUT BUTTON LOCK.
3. Press ENTER and select ON or OFF.
Input select buttons are locked.
Setting Output Parameters
KIT-400R enables setting output parameters such as the size of the image and output
resolution via the OSD MENU buttons.
To set the output parameters:
1. On the front panel press MENU. The menu appears.
2. Click OUTPUT and define the output parameters according to the information in the
following table:
Menu Item
Function
Size
Set the size of the image: Over Scan, Full, Best Fit (default), Pan Scan, Letter Box, Under
2, Under 1, Follow In.
Resolution
Select the output resolution (default, Native HDMI):
640x480 @60Hz
1600x1200 @60Hz
3440x1440 @30Hz
1920x1080P @50Hz
800x600 @60Hz
1680x1050 @60Hz
3440x1440 @60Hz
1920x1080P @60Hz
1024x768 @60Hz
1920x1200 @60Hz RB
720x480P @60Hz
2560x1080P @50Hz
1280x768 @60Hz
2560x1600 @60Hz RB
720x576P @50Hz
2560x1080P @60Hz
1280x800 @60Hz
1920x1080 @60Hz
1280x720P @50Hz
3840x2160P @24Hz
1280x1024 @60Hz
1280x720 @60Hz
1280x720P @60Hz
3840x2160P @25Hz
1360x768 @60Hz
2048x1080 @50Hz
1920x1080P @24Hz
3840x2160P @30Hz
1400x1050 @60Hz
2048x1080 @60Hz
1920x1080P @25Hz
3840x2160P @50Hz
1440x900 @60Hz
2560x1440 @60Hz RB
1920x1080P @30Hz
3840x2160P @60Hz
Output parameters are defined.