Kramer KIT-400

Kramer Electronics Ltd.
KIT-400 – Operating and Controlling KIT-400
19
Setting Audio Parameters
KIT-400R enables defining the audio delay time and the output volume.
To set the audio:
1. On the front panel press MENU. The menu appears.
2. Click Audio and define the audio parameters according to the information in the
following table:
Menu Item
Function
DELAY
Set the audio delay time (lip sync) to off, 40ms (default),110ms or 150ms.
AUDIO VOLUME
Set the AUDIO OUT output volume (default is 80 = 0dB).
Audio parameters are defined.
Setting OSD Parameters
KIT-400R enables adjusting OSD parameters for your convenience via the OSD MENU
buttons.
To set the OSD parameters:
1. On the front panel press MENU. The menu appears.
2. Click OSD and define the OSD parameters according to the information in the following
table:
Menu Item
Function
H-POSITION
Set the horizontal position of the OSD.
V-POSITION
Set the vertical position of the OSD.
TIMER
Set the timeout period to Off or up to 60 seconds (default 10).
TRANSPARENCY
Set the OSD background between 100 (transparent) and 0 (opaque).
DISPLAY
Select the information displayed on-screen during operation:
Info (default) –Information appears for 10 seconds.
On –Information appears constantly.
Off – Information does not appear.
OSD parameters are set.